Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Civic Si built from 2002 to 2005.
Every 2002-2005 Honda Civic Si uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Honda Civic Si (EP3) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Si | 2002-2005 |
Wheel sizes Honda fitted to the 2002-2005 Honda Civic Si from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +45 |
| 16x6.5 +45 |
| 17x6.5 +45 |
| 17x7 +45 |
Widths and offsets with Verified Fitment on the 2002-2005 Honda Civic Si: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 6" | +28 to +51 |
| 15-18" | 6.5" | +34 to +44 |
Wider still: 15x7.5 +26 to +37; 16x7.5 +26 to +37; 17x7.5 +26 to +37; 18x7.5 +26 to +37 fit with modifications (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2002-2005 Honda Civic Si. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels)
The 2002-2005 Honda Civic Si (EP3) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.
Factory sizes: 15x6 +45; 16x6.5 +45; 17x6.5 +45; 17x7 +45.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.