Honda Clarity 2nd Gen 2017-2021 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Honda Clarity built from 2017 to 2021 (Plug-In Hybrid, Plug-In Hybrid Touring, Electric, Fuel Cell).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years2017-2021
Generation2nd Gen

Every 2017-2021 Honda Clarity uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Clarity (2nd Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Plug-In Hybrid2018-202118x8 +50
Plug-In Hybrid Touring2018-202118x8 +50
Electric2017-201918x8 +50
Fuel Cell2017-202118x8 +50

Factory wheel sizes

Wheel sizes Honda fitted to the 2017-2021 Honda Clarity from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2017-2021 Honda Clarity: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-20"8"+33 to +55
18-20"8.5"+39 to +49

Wider still: 18x9.5 +31 to +42; 19x9.5 +31 to +42; 20x9.5 +31 to +42 fit with modifications (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2021 Honda Clarity. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll rear fender lips, front camber bolts / rear camber arms for -1.5° or more, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2017-2021 Honda Clarity?

The 2017-2021 Honda Clarity (2nd Gen) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2017-2021 Honda Clarity from the factory?

Factory sizes: 18x8 +50.

What lug thread size does the 2017-2021 Honda Clarity use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2017-2021 Honda Clarity without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.