Honda FCX 1st Gen 2002-2007 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda FCX built from 2002 to 2007.

Fitment specs

Bolt pattern5X114.3
Model years2002-2007
Generation1st Gen

Every 2002-2007 Honda FCX uses a 5X114.3 bolt pattern. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Factory wheel sizes

Wheel sizes Honda fitted to the 2002-2007 Honda FCX from the factory. Offsets are ET in millimeters.

Factory size
15x6 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2002-2007 Honda FCX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-16"6"+33 to +56
15-16"6.5"+39 to +49

Wider still: 15x7.5 +31 to +42; 16x7.5 +31 to +42; 17x7.5 +31 to +42 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2002-2007 Honda FCX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2002-2007 Honda FCX?

The 2002-2007 Honda FCX (1st Gen) uses a 5X114.3 bolt pattern.

What size wheels came on the 2002-2007 Honda FCX from the factory?

Factory sizes: 15x6 +50.

What aftermarket wheel sizes fit the 2002-2007 Honda FCX without modifications?

Bolt-on sizes run from 15" to 16" in diameter; see the size table for the offset range at each width.