Honda Fit (GD) 2007-2008 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Honda Fit built from 2007 to 2008 (Base, Sport).

Fitment specs

Bolt pattern4X100
Center bore56.1 mm
Lug threadM12x1.5
Model years2007-2008
GenerationGD

Every 2007-2008 Honda Fit uses a 4X100 bolt pattern with a 56.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 56.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Fit (GD) and the model years each was sold. All of them share the 4X100 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2007-2008See factory sizes below
Sport2007-200815x6 +50

Factory wheel sizes

Wheel sizes Honda fitted to the 2007-2008 Honda Fit from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
14x5.5 +45
15x6 +50
15x6 +53
16x6 +55
16x6.5 +48

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2007-2008 Honda Fit: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base

DiameterWidthOffset range
14-17"5.5"+24 to +54
14-17"6"+31 to +48
14-17"6.5"+37 to +42

Sport

DiameterWidthOffset range
15-17"6"+31 to +50
15-17"6.5"+37 to +43

FAQ

What is the bolt pattern of the 2007-2008 Honda Fit?

The 2007-2008 Honda Fit (GD) uses a 4X100 bolt pattern and a 56.1 mm center bore.

What size wheels came on the 2007-2008 Honda Fit from the factory?

Factory sizes: 14x5.5 +45; 15x6 +50; 15x6 +53; 16x6 +55; 16x6.5 +48.

What lug thread size does the 2007-2008 Honda Fit use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2007-2008 Honda Fit without modifications?

Bolt-on sizes run from 14" to 17" in diameter; see the size table for the offset range at each width.