Honda Pilot (YF1/YF2) 2006-2008 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Honda Pilot built from 2006 to 2008 (LX, EX, EX-L).

Fitment specs

Bolt pattern5X114.3
Center bore64.1 mm
Lug threadM12x1.5
Model years2006-2008
GenerationYF1/YF2

Every 2006-2008 Honda Pilot uses a 5X114.3 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Pilot (YF1/YF2) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
LX2006-200816x6.5 +45
EX2006-200816x6.5 +45
EX-L2006-200816x6.5 +45

Factory wheel sizes

Wheel sizes Honda fitted to the 2006-2008 Honda Pilot from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x6.5 +45
17x7 +50
17x7.5 +47
18x7.5 +47
18x8 +45
19x8 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2006-2008 Honda Pilot: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-20"6.5"+28 to +50
16-20"7"+34 to +44

Wider still: 16x8 +26 to +37; 17x8 +26 to +37; 18x8 +26 to +37; 19x8 +26 to +37; 20x8 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2006-2008 Honda Pilot. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2006-2008 Honda Pilot?

The 2006-2008 Honda Pilot (YF1/YF2) uses a 5X114.3 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2006-2008 Honda Pilot from the factory?

Factory sizes: 16x6.5 +45; 17x7 +50; 17x7.5 +47; 18x7.5 +47; 18x8 +45; 19x8 +45.

What lug thread size does the 2006-2008 Honda Pilot use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2006-2008 Honda Pilot without modifications?

Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.