Honda Prelude (BF1) 2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Honda Prelude built from 2026 to 2026.

Fitment specs

Bolt pattern5X120
Center bore64.1 mm
Lug threadM14x1.5
Model years2026
GenerationBF1

Every 2026 Honda Prelude uses a 5X120 bolt pattern with a 64.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 64.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Prelude (BF1) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYears
Base2026

Factory wheel sizes

Wheel sizes Honda fitted to the 2026 Honda Prelude from the factory. Offsets are ET in millimeters.

Factory size
19x8.5 +60

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2026 Honda Prelude: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
19-20"8.5"+43 to +65
19-20"9"+49 to +59

Wider still: 19x10 +41 to +52; 20x10 +41 to +52 fit with modifications (roll / pull rear fender lips, adjustable camber arms or camber plates, hub-centric rings for aftermarket wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2026 Honda Prelude. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll / pull rear fender lips, adjustable camber arms or camber plates, hub-centric rings for aftermarket wheels)

FAQ

What is the bolt pattern of the 2026 Honda Prelude?

The 2026 Honda Prelude (BF1) uses a 5X120 bolt pattern and a 64.1 mm center bore.

What size wheels came on the 2026 Honda Prelude from the factory?

Factory sizes: 19x8.5 +60.

What lug thread size does the 2026 Honda Prelude use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2026 Honda Prelude without modifications?

Bolt-on sizes run from 19" to 20" in diameter; see the size table for the offset range at each width.