Honda Prologue 1st Gen 2024-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Honda Prologue built from 2024 to 2026 (EX, Touring, Elite).

Fitment specs

Bolt pattern6X132
Center bore74.5 mm
Lug threadM14x1.5
Model years2024-2026
Generation1st Gen

Every 2024-2026 Honda Prologue uses a 6X132 bolt pattern with a 74.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 74.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Honda Prologue (1st Gen) and the model years each was sold. All of them share the 6X132 bolt pattern.

SubmodelYearsFactory wheel sizes
EX2024-202619x8.5 +37
Touring2024-202619x8.5 +37
Elite2024-202621x9.5 +40

Factory wheel sizes

Wheel sizes Honda fitted to the 2024-2026 Honda Prologue from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
19x8.5 +37
20x9 +40
21x9.5 +40
22x9.5 +40

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2026 Honda Prologue: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

EX, Touring

DiameterWidthOffset range
19-23"8.5"+10 to +47
19-23"9"+16 to +52
19-23"9.5"+23 to +45
19-23"10"+29 to +39

Wider still: 19x11 +21 to +32; 20x11 +21 to +32; 21x11 +21 to +32; 22x11 +21 to +32; 23x11 +21 to +32 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

Elite

DiameterWidthOffset range
21-23"9.5"+23 to +45
21-23"10"+29 to +39

Wider still: 21x11 +21 to +32; 22x11 +21 to +32; 23x11 +21 to +32 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll rear fender lips, hub-centric rings for aftermarket wheels).

FAQ

What is the bolt pattern of the 2024-2026 Honda Prologue?

The 2024-2026 Honda Prologue (1st Gen) uses a 6X132 bolt pattern and a 74.5 mm center bore.

What size wheels came on the 2024-2026 Honda Prologue from the factory?

Factory sizes: 19x8.5 +37; 20x9 +40; 21x9.5 +40; 22x9.5 +40.

What lug thread size does the 2024-2026 Honda Prologue use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2024-2026 Honda Prologue without modifications?

Bolt-on sizes run from 19" to 23" in diameter; see the size table for the offset range at each width.