Hyundai Accent (RB) 2012-2017 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Hyundai Accent built from 2012 to 2017 (GLS, GS, SE).

Fitment specs

Bolt pattern4X100
Center bore54.1 mm
Lug threadM12x1.5
Model years2012-2017
GenerationRB

Every 2012-2017 Hyundai Accent uses a 4X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Hyundai Accent (RB) and the model years each was sold. All of them share the 4X100 bolt pattern.

SubmodelYearsFactory wheel sizes
GLS2012-2016See factory sizes below
GS2012-2017See factory sizes below
SE2012-201715x5.5 +45

Factory wheel sizes

Wheel sizes Hyundai fitted to the 2012-2017 Hyundai Accent from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
13x5 +46
14x5.5 +43
14x5.5 +46
15x6 +42
16x6 +49
16x6 +52
16x6.5 +47
17x6.5 +47

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2012-2017 Hyundai Accent: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

GLS, GS

DiameterWidthOffset range
13-16"5"+19 to +56
13-16"5.5"+26 to +54
13-16"6"+32 to +47
13-16"6.5"+39 to +41

Wider still: 13x7.5 +31 to +32; 14x7.5 +31 to +32; 15x7.5 +31 to +32; 16x7.5 +31 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).

SE

DiameterWidthOffset range
15-16"5.5"+26 to +54
15-16"6"+32 to +47
15-16"6.5"+39 to +41

Wider still: 15x7.5 +31 to +32; 16x7.5 +31 to +32 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).

FAQ

What is the bolt pattern of the 2012-2017 Hyundai Accent?

The 2012-2017 Hyundai Accent (RB) uses a 4X100 bolt pattern and a 54.1 mm center bore.

What size wheels came on the 2012-2017 Hyundai Accent from the factory?

Factory sizes: 13x5 +46; 14x5.5 +43; 14x5.5 +46; 15x6 +42; 16x6 +49; 16x6 +52; 16x6.5 +47; 17x6.5 +47.

What lug thread size does the 2012-2017 Hyundai Accent use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2012-2017 Hyundai Accent without modifications?

Bolt-on sizes run from 13" to 16" in diameter; see the size table for the offset range at each width.