Hyundai Elantra GT (PD) 2018-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Hyundai Elantra GT built from 2018 to 2020 (Base, Sport, N Line).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2018-2020
GenerationPD

Every 2018-2020 Hyundai Elantra GT uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Hyundai Elantra GT (PD) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
Base2018-2020
Sport2018-2020
N Line2020

Factory wheel sizes

Wheel sizes Hyundai fitted to the 2018-2020 Hyundai Elantra GT from the factory. Offsets are ET in millimeters.

Factory size
17x7 +51
18x7.5 +53
19x7.5 +53

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2018-2020 Hyundai Elantra GT: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-19"7"+29 to +61
17-19"7.5"+36 to +58
17-19"8"+42 to +52

Wider still: 17x9 +34 to +45; 18x9 +34 to +45; 19x9 +34 to +45 fit with modifications (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2018-2020 Hyundai Elantra GT. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2018-2020 Hyundai Elantra GT?

The 2018-2020 Hyundai Elantra GT (PD) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2018-2020 Hyundai Elantra GT from the factory?

Factory sizes: 17x7 +51; 18x7.5 +53; 19x7.5 +53.

What lug thread size does the 2018-2020 Hyundai Elantra GT use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2018-2020 Hyundai Elantra GT without modifications?

Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.