Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Hyundai Elantra Touring built from 2009 to 2012 (GLS, SE).
Every 2009-2012 Hyundai Elantra Touring uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Hyundai Elantra Touring (FD) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| GLS | 2009-2012 |
| SE | 2009-2012 |
Wheel sizes Hyundai fitted to the 2009-2012 Hyundai Elantra Touring from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 15x5.5 +47 |
| 16x6 +50 |
| 17x7 +56 |
Widths and offsets with Verified Fitment on the 2009-2012 Hyundai Elantra Touring: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 5.5" | +20 to +57 |
| 15-18" | 6" | +26 to +63 |
| 15-18" | 6.5" | +33 to +68 |
| 15-18" | 7" | +39 to +61 |
| 15-18" | 7.5" | +45 to +55 |
Wider still: 15x8.5 +37 to +48; 16x8.5 +37 to +48; 17x8.5 +37 to +48; 18x8.5 +37 to +48 fit with modifications (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2009-2012 Hyundai Elantra Touring. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger)









The 2009-2012 Hyundai Elantra Touring (FD) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 15x5.5 +47; 16x6 +50; 17x7 +56.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.