Hyundai Ioniq (AE) 2017-2021 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Hyundai Ioniq built from 2017 to 2021 (Blue, SE, SEL, Limited, Plug-in, Electric).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2017-2021
GenerationAE

Every 2017-2021 Hyundai Ioniq uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Hyundai Ioniq (AE) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Blue2017-2021See factory sizes below
SE2017-2021See factory sizes below
SEL2017-2021See factory sizes below
Limited2017-2021See factory sizes below
Plug-in2018-2021See factory sizes below
Electric2017-202116x6.5 +50

Factory wheel sizes

Wheel sizes Hyundai fitted to the 2017-2021 Hyundai Ioniq from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +46
16x6.5 +50
17x6.5 +50
17x7 +53

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2017-2021 Hyundai Ioniq: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Blue, SE, SEL, Limited, Plug-in

DiameterWidthOffset range
15-17"6"+26 to +56
15-17"6.5"+33 to +55
15-17"7"+39 to +49

Wider still: 15x8 +31 to +42; 16x8 +31 to +42; 17x8 +31 to +42 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).

Electric

DiameterWidthOffset range
16-17"6.5"+33 to +55
16-17"7"+39 to +49

Wider still: 16x8 +31 to +42; 17x8 +31 to +42 fit with modifications (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2021 Hyundai Ioniq. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Blue, SE, SEL, Limited, Plug-in

Modifications Required (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger)

Electric

Modifications Required (roll front and rear fender lips, front camber bolts for -1°, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2017-2021 Hyundai Ioniq?

The 2017-2021 Hyundai Ioniq (AE) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2017-2021 Hyundai Ioniq from the factory?

Factory sizes: 15x6 +46; 16x6.5 +50; 17x6.5 +50; 17x7 +53.

What lug thread size does the 2017-2021 Hyundai Ioniq use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2017-2021 Hyundai Ioniq without modifications?

Bolt-on sizes run from 15" to 17" in diameter; see the size table for the offset range at each width.