Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Hyundai Ioniq 5 N built from 2025 to 2026.
Every 2025-2026 Hyundai Ioniq 5 N uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Hyundai Ioniq 5 N (NE) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| N | 2025-2026 |
Wheel sizes Hyundai fitted to the 2025-2026 Hyundai Ioniq 5 N from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 21x9.5 +45 |
Widths and offsets with Verified Fitment on the 2025-2026 Hyundai Ioniq 5 N: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 21-22" | 9.5" | +28 to +50 |
| 21-22" | 10" | +34 to +44 |
Wider still: 21x11 +26 to +37; 22x11 +26 to +37 fit with modifications (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires).
The 2025-2026 Hyundai Ioniq 5 N (NE) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 21x9.5 +45.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 21" to 22" in diameter; see the size table for the offset range at each width.