Hyundai Ioniq 5 (NE) 2022-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Hyundai Ioniq 5 built from 2022 to 2026 (SE Standard Range, SE, SEL, Limited, XRT).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2022-2026
GenerationNE

Every 2022-2026 Hyundai Ioniq 5 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Hyundai Ioniq 5 (NE) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
SE Standard Range2022-202619x7.5 +49
19x7.5 +49.5
19x8 +50
SE2022-202619x7.5 +49
19x7.5 +49.5
19x8 +50
SEL2022-202619x7.5 +49
19x7.5 +49.5
19x8 +50
Limited2022-202619x7.5 +49
19x7.5 +49.5
19x8 +50
XRT2025-202618x7.5 +50

Factory wheel sizes

Wheel sizes Hyundai fitted to the 2022-2026 Hyundai Ioniq 5 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7.5 +50
19x7.5 +49
19x8 +50
20x8 +50
20x8.5 +50
20x8.5 +54
21x8.5 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2022-2026 Hyundai Ioniq 5: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SE Standard Range, SE, SEL, Limited

DiameterWidthOffset range
19-22"7.5"+32 to +55
19-22"8"+39 to +49

Wider still: 19x9 +31 to +42; 20x9 +31 to +42; 21x9 +31 to +42; 22x9 +31 to +42 fit with modifications (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires).

XRT

DiameterWidthOffset range
19-22"7.5"+32 to +55
19-22"8"+39 to +49

Wider still: 19x9 +31 to +42; 20x9 +31 to +42; 21x9 +31 to +42; 22x9 +31 to +42 fit with modifications (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2026 Hyundai Ioniq 5. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

SE Standard Range, SE, SEL, Limited

Modifications Required (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires)

XRT

Modifications Required (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires)

FAQ

What is the bolt pattern of the 2022-2026 Hyundai Ioniq 5?

The 2022-2026 Hyundai Ioniq 5 (NE) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2022-2026 Hyundai Ioniq 5 from the factory?

Factory sizes: 18x7.5 +50; 19x7.5 +49; 19x8 +50; 20x8 +50; 20x8.5 +50; 20x8.5 +54; 21x8.5 +50.

What lug thread size does the 2022-2026 Hyundai Ioniq 5 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2022-2026 Hyundai Ioniq 5 without modifications?

Bolt-on sizes run from 19" to 22" in diameter; see the size table for the offset range at each width.