Hyundai Ioniq 9 (ME) 2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Hyundai Ioniq 9 built from 2026 to 2026 (S, SE, SEL, Performance Calligraphy).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2026
GenerationME

Every 2026 Hyundai Ioniq 9 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Hyundai Ioniq 9 (ME) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
S202619x8 +53
SE202619x8 +53
SEL202620x8 +53
Performance Calligraphy2026See factory sizes below

Factory wheel sizes

Wheel sizes Hyundai fitted to the 2026 Hyundai Ioniq 9 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
19x8 +53
20x8 +53
21x9 +58

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2026 Hyundai Ioniq 9: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

S, SE, Performance Calligraphy

DiameterWidthOffset range
19-23"8"+28 to +63
19-23"8.5"+35 to +69
19-23"9"+41 to +63
19-23"9.5"+47 to +57

Wider still: 19x10.5 +39 to +50; 20x10.5 +39 to +50; 21x10.5 +39 to +50; 22x10.5 +39 to +50; 23x10.5 +39 to +50 fit with modifications (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires).

SEL

DiameterWidthOffset range
20-23"8"+28 to +63
20-23"8.5"+35 to +69
20-23"9"+41 to +63
20-23"9.5"+47 to +57

Wider still: 20x10.5 +39 to +50; 21x10.5 +39 to +50; 22x10.5 +39 to +50; 23x10.5 +39 to +50 fit with modifications (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2026 Hyundai Ioniq 9. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

S, SE, Performance Calligraphy

Modifications Required (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires)

SEL

FAQ

What is the bolt pattern of the 2026 Hyundai Ioniq 9?

The 2026 Hyundai Ioniq 9 (ME) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2026 Hyundai Ioniq 9 from the factory?

Factory sizes: 19x8 +53; 20x8 +53; 21x9 +58.

What lug thread size does the 2026 Hyundai Ioniq 9 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2026 Hyundai Ioniq 9 without modifications?

Bolt-on sizes run from 19" to 23" in diameter; see the size table for the offset range at each width.