Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Hyundai Kona N built from 2022 to 2023.
Every 2022-2023 Hyundai Kona N uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Hyundai Kona N (OS) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2022-2023 |
Wheel sizes Hyundai fitted to the 2022-2023 Hyundai Kona N from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x7.5 +52 |
| 19x8 +55 |
Widths and offsets with Verified Fitment on the 2022-2023 Hyundai Kona N: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-19" | 8" | +38 to +60 |
| 18-19" | 8.5" | +44 to +54 |
Wider still: 18x9.5 +36 to +47; 19x9.5 +36 to +47 fit with modifications (roll and lightly pull rear fender lips, front camber bolts / rear camber arms for -1.5° or more, check strut and caliper clearance on low-offset wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2023 Hyundai Kona N. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll and lightly pull rear fender lips, front camber bolts / rear camber arms for -1.5° or more, check strut and caliper clearance on low-offset wheels)












The 2022-2023 Hyundai Kona N (OS) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 18x7.5 +52; 19x8 +55.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 18" to 19" in diameter; see the size table for the offset range at each width.