Hyundai Tucson (TL) 2016-2021 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Hyundai Tucson built from 2016 to 2021 (SE, Eco, Sport, Value, SEL, Limited, Night, Ultimate).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2016-2021
GenerationTL

Every 2016-2021 Hyundai Tucson uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Hyundai Tucson (TL) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
SE2016-202117x7 +51
Eco2016-202117x7 +51
Sport2016-202119x7.5 +53
Value2016-202117x7 +51
SEL2016-202118x7 +51
Limited2016-202118x7 +51
19x7.5 +53
Night2016-2021See factory sizes below
Ultimate2019-202118x7 +51

Factory wheel sizes

Wheel sizes Hyundai fitted to the 2016-2021 Hyundai Tucson from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x7 +48.5
17x7 +51
18x7 +51
18x7.5 +51
18x7.5 +53
19x7 +51
19x7.5 +51
19x7.5 +53
20x7.5 +48
20x8 +48

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2016-2021 Hyundai Tucson: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SE, Eco, Value, Night

DiameterWidthOffset range
17-20"7"+21 to +56
17-20"7.5"+28 to +50
17-20"8"+34 to +44

Sport

DiameterWidthOffset range
19-20"7.5"+28 to +53
19-20"8"+34 to +46
19-20"8.5"+40

SEL, Limited, Ultimate

DiameterWidthOffset range
18-20"7"+21 to +56
18-20"7.5"+28 to +50
18-20"8"+34 to +44

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2021 Hyundai Tucson. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

SE, Eco, Value, Night

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

Sport

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

SEL, Limited, Ultimate

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2016-2021 Hyundai Tucson?

The 2016-2021 Hyundai Tucson (TL) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2016-2021 Hyundai Tucson from the factory?

Factory sizes: 17x7 +48.5; 17x7 +51; 18x7 +51; 18x7.5 +51; 18x7.5 +53; 19x7 +51; 19x7.5 +51; 19x7.5 +53; 20x7.5 +48; 20x8 +48.

What lug thread size does the 2016-2021 Hyundai Tucson use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2016-2021 Hyundai Tucson without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.