Hyundai Venue (QX) 2023-2025 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Hyundai Venue built from 2023 to 2025 (SE, SEL, Limited).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2023-2025
GenerationQX

Every 2023-2025 Hyundai Venue uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Hyundai Venue (QX) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
SE2023-202515x6 +41
SEL2023-202517x6.5 +51
Limited2023-202517x6.5 +51

Factory wheel sizes

Wheel sizes Hyundai fitted to the 2023-2025 Hyundai Venue from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6 +41
16x6.5 +51
17x6.5 +51

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2023-2025 Hyundai Venue: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

SE

DiameterWidthOffset range
15-19"6"+24 to +51
15-19"6.5"+30 to +56
15-19"7"+37 to +50
15-19"7.5"+43 to +44

Wider still: 15x8 +29 to +43; 15x8.5 +35 to +37; 16x8 +29 to +43; 16x8.5 +35 to +37; 17x8 +29 to +43; 17x8.5 +35 to +37… fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).

SEL, Limited

DiameterWidthOffset range
17-19"6.5"+30 to +56
17-19"7"+37 to +50
17-19"7.5"+43 to +44

Wider still: 17x8 +29 to +43; 17x8.5 +35 to +37; 18x8 +29 to +43; 18x8.5 +35 to +37; 19x8 +29 to +43; 19x8.5 +35 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2025 Hyundai Venue. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

SE

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

SEL, Limited

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2023-2025 Hyundai Venue?

The 2023-2025 Hyundai Venue (QX) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2023-2025 Hyundai Venue from the factory?

Factory sizes: 15x6 +41; 16x6.5 +51; 17x6.5 +51.

What lug thread size does the 2023-2025 Hyundai Venue use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2023-2025 Hyundai Venue without modifications?

Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.