Infiniti FX50 (S51) 2009-2013 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Infiniti FX50 built from 2009 to 2013.

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Model years2009-2013
GenerationS51

Every 2009-2013 Infiniti FX50 uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Infiniti FX50 (S51) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2009-201320x8 +50
21x9.5 +50

Factory wheel sizes

Wheel sizes Infiniti fitted to the 2009-2013 Infiniti FX50 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +50
19x8 +50
20x8 +50
21x9.5 +50
22x10 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2009-2013 Infiniti FX50: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
20-22"8"+33 to +55
20-22"8.5"+39 to +49

Wider still: 20x9.5 +31 to +42; 21x9.5 +31 to +42; 22x9.5 +31 to +42 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2009-2013 Infiniti FX50. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels)

FAQ

What is the bolt pattern of the 2009-2013 Infiniti FX50?

The 2009-2013 Infiniti FX50 (S51) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2009-2013 Infiniti FX50 from the factory?

Factory sizes: 18x8 +50; 19x8 +50; 20x8 +50; 21x9.5 +50; 22x10 +45.

What aftermarket wheel sizes fit the 2009-2013 Infiniti FX50 without modifications?

Bolt-on sizes run from 20" to 22" in diameter; see the size table for the offset range at each width.