Infiniti G35 (V36) 2007-2008 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Infiniti G35 built from 2007 to 2008 (Sedan, x, Journey, Sport, Coupe).

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2007-2008
GenerationV36

Every 2007-2008 Infiniti G35 uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Infiniti G35 (V36) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
Sedan2007-2008
x2007-2008
Journey2007-2008
Sport2007-2008
Coupe2007

Factory wheel sizes

Wheel sizes Infiniti fitted to the 2007-2008 Infiniti G35 from the factory. Offsets are ET in millimeters.

Factory size
17x7.5 +45
18x7.5 +45
18x7.5 +45 front / 18x8.5 +50 rear
19x8 +45 front / 19x9 +45 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2007-2008 Infiniti G35: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
18-19"7.5"+28 to +52—
18-19"8"+34 to +46—
18-19"8.5"—+33 to +55
18-19"9"—+39 to +49

Wider still: 18x10 front — / rear +31 to +42; 19x10 front — / rear +31 to +42 fit with modifications (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2007-2008 Infiniti G35. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed)

FAQ

What is the bolt pattern of the 2007-2008 Infiniti G35?

The 2007-2008 Infiniti G35 (V36) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2007-2008 Infiniti G35 from the factory?

Factory sizes: 17x7.5 +45; 18x7.5 +45; 18x7.5 +45 front / 18x8.5 +50 rear; 19x8 +45 front / 19x9 +45 rear.

What lug thread size does the 2007-2008 Infiniti G35 use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2007-2008 Infiniti G35 without modifications?

Bolt-on sizes run from 18" to 19" in diameter; see the size table for the offset range at each width.