Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Infiniti Q50 built from 2014 to 2024 (3.7, Premium, Sport, 2.0t, 3.0t, Hybrid, Luxe, Signature Edition, Sensory, Red Sport 400).
Every 2014-2024 Infiniti Q50 uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Infiniti Q50 (V37) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 3.7 | 2014-2015 | 17x7.5 +45 |
| Premium | 2014-2018 | See factory sizes below |
| Sport | 2014-2018 | 19x8.5 +50 19x9 +47 front / 19x9.5 +50 rear 19x9.5 +50 |
| 2.0t | 2016-2018 | 17x7.5 +45 18x7.5 +45 19x8.5 +50 19x9 +47 front / 19x9.5 +50 rear |
| 3.0t | 2016-2018 | 17x7.5 +45 18x7.5 +45 19x8.5 +50 19x9 +47 front / 19x9.5 +50 rear 19x9.5 +50 20x9 +45 20x9 +45 front / 20x10 +45 rear |
| Hybrid | 2014-2018 | See factory sizes below |
| Luxe | 2019-2024 | 18x7.5 +45 |
| Signature Edition | 2018-2020 | See factory sizes below |
| Sensory | 2021-2024 | 19x8.5 +50 19x9 +47 front / 19x9.5 +50 rear |
| Red Sport 400 | 2016-2024 | 19x8.5 +50 19x9 +47 front / 19x9.5 +50 rear 19x9.5 +50 |
Wheel sizes Infiniti fitted to the 2014-2024 Infiniti Q50 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +45 |
| 18x7.5 +45 |
| 19x8.5 +50 |
| 19x9 +47 front / 19x9.5 +50 rear |
| 19x9.5 +50 |
| 20x9 +45 |
| 20x9 +45 front / 20x10 +45 rear |
| 20x10 +45 |
Widths and offsets with Verified Fitment on the 2014-2024 Infiniti Q50: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-20" | 7.5" | +11 to +55 | +15 to +55 |
| 17-20" | 8" | +17 to +61 | +21 to +61 |
| 17-20" | 8.5" | +24 to +59 | +28 to +55 |
| 17-20" | 9" | +30 to +52 | +34 to +49 |
| 17-20" | 9.5" | +36 to +46 | +40 to +43 |
Wider still: 17x10.5 front +28 to +39 / rear —; 18x10.5 front +28 to +39 / rear —; 19x10.5 front +28 to +39 / rear —; 20x10.5 front +28 to +39 / rear — fit with modifications (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 19-20" | 8.5" | +24 to +59 | +28 to +55 |
| 19-20" | 9" | +30 to +52 | +34 to +49 |
| 19-20" | 9.5" | +36 to +46 | +40 to +43 |
Wider still: 19x10.5 front +28 to +39 / rear —; 20x10.5 front +28 to +39 / rear — fit with modifications (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-20" | 7.5" | +11 to +55 | +15 to +55 |
| 18-20" | 8" | +17 to +61 | +21 to +61 |
| 18-20" | 8.5" | +24 to +59 | +28 to +55 |
| 18-20" | 9" | +30 to +52 | +34 to +49 |
| 18-20" | 9.5" | +36 to +46 | +40 to +43 |
Wider still: 18x10.5 front +28 to +39 / rear —; 19x10.5 front +28 to +39 / rear —; 20x10.5 front +28 to +39 / rear — fit with modifications (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2024 Infiniti Q50. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed)
















Modifications Required (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed)

















Modifications Required (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed)




The 2014-2024 Infiniti Q50 (V37) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.
Factory sizes: 17x7.5 +45; 18x7.5 +45; 19x8.5 +50; 19x9 +47 front / 19x9.5 +50 rear; 19x9.5 +50; 20x9 +45; 20x9 +45 front / 20x10 +45 rear; 20x10 +45.
Its wheel fasteners use a M12x1.25 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.