Infiniti Q60 Coupe (CV36) 2014-2015 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Infiniti Q60 Coupe built from 2014 to 2015 (Base, Journey, x, Sport, Convertible).

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2014-2015
GenerationCV36

Every 2014-2015 Infiniti Q60 Coupe uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Infiniti Q60 Coupe (CV36) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
Base2014-2015
Journey2014-2015
x2014-2015
Sport2014-2015
Convertible2014-2015

Factory wheel sizes

Wheel sizes Infiniti fitted to the 2014-2015 Infiniti Q60 Coupe from the factory. Offsets are ET in millimeters.

Factory size
18x8 +43
18x8 +43 front / 18x8.5 +27 rear
18x8.5 +27
19x8.5 +43
19x8.5 +43 front / 19x9 +30 rear
19x8.5 +43 front / 19x9 +45 rear
19x9 +30
20x9 +30

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2014-2015 Infiniti Q60 Coupe: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
18-20"8.5"+10 to +37+10 to +37
18-20"9"+16 to +42+16 to +43
18-20"9.5"+23 to +36+23 to +44
18-20"10"—+29 to +38

Wider still: 18x10.5 front +15 to +29 / rear +15 to +37; 18x11 front — / rear +21 to +31; 19x10.5 front +15 to +29 / rear +15 to +37; 19x11 front — / rear +21 to +31; 20x10.5 front +15 to +29 / rear +15 to +37; 20x11 front — / rear +21 to +31 fit with modifications (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2015 Infiniti Q60 Coupe. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed)

FAQ

What is the bolt pattern of the 2014-2015 Infiniti Q60 Coupe?

The 2014-2015 Infiniti Q60 Coupe (CV36) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2014-2015 Infiniti Q60 Coupe from the factory?

Factory sizes: 18x8 +43; 18x8 +43 front / 18x8.5 +27 rear; 18x8.5 +27; 19x8.5 +43; 19x8.5 +43 front / 19x9 +30 rear; 19x8.5 +43 front / 19x9 +45 rear; 19x9 +30; 20x9 +30.

What lug thread size does the 2014-2015 Infiniti Q60 Coupe use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2014-2015 Infiniti Q60 Coupe without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.