Infiniti Q60 (CV37) 2017-2022 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Infiniti Q60 built from 2017 to 2022 (2.0t, 3.0t, Pure, Luxe, Sensory, Red Sport 400).

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2017-2022
GenerationCV37

Every 2017-2022 Infiniti Q60 uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Infiniti Q60 (CV37) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
2.0t2017-201919x9 +40
19x9 +37 front / 19x9.5 +44 rear
20x9 +40
20x9 +40 front / 20x9.5 +47 rear
3.0t2017-201919x9 +40
19x9 +37 front / 19x9.5 +44 rear
19x9.5 +44
20x9 +40
20x9 +40 front / 20x9.5 +47 rear
20x9.5 +47
Pure2018-2019See factory sizes below
Luxe2019-202219x9 +40
Sensory2021-2022See factory sizes below
Red Sport 4002017-202219x9 +40
19x9 +37 front / 19x9.5 +44 rear
19x9.5 +44
20x9 +40
20x9 +40 front / 20x9.5 +47 rear
20x9.5 +47

Factory wheel sizes

Wheel sizes Infiniti fitted to the 2017-2022 Infiniti Q60 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
19x9 +40
19x9 +37 front / 19x9.5 +44 rear
19x9.5 +44
20x9 +40
20x9 +40 front / 20x9.5 +47 rear
20x9.5 +47

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2017-2022 Infiniti Q60: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
19-20"9"+20 to +45+20 to +50
19-20"9.5"+26 to +39+27 to +49
19-20"10"+33+33 to +43

Wider still: 19x11 front +24 to +26 / rear +25 to +36; 20x11 front +24 to +26 / rear +25 to +36 fit with modifications (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2022 Infiniti Q60. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed)

FAQ

What is the bolt pattern of the 2017-2022 Infiniti Q60?

The 2017-2022 Infiniti Q60 (CV37) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2017-2022 Infiniti Q60 from the factory?

Factory sizes: 19x9 +40; 19x9 +37 front / 19x9.5 +44 rear; 19x9.5 +44; 20x9 +40; 20x9 +40 front / 20x9.5 +47 rear; 20x9.5 +47.

What lug thread size does the 2017-2022 Infiniti Q60 use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2017-2022 Infiniti Q60 without modifications?

Bolt-on sizes run from 19" to 20" in diameter; see the size table for the offset range at each width.