Infiniti QX30 2017-2019 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Infiniti QX30 built from 2017 to 2019 (Base, Premium, Luxury, Sport, AWD).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years2017-2019
Generation

Every 2017-2019 Infiniti QX30 uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Infiniti QX30 and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2017-201918x7 +41
18x7 +46
Premium2017-201918x7 +41
18x7 +46
Luxury2018-201918x7 +41
18x7 +46
Sport2017-201919x7.5 +41
19x8 +43.5
AWD2017-2019See factory sizes below

Factory wheel sizes

Wheel sizes Infiniti fitted to the 2017-2019 Infiniti QX30 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
17x6.5 +38
17x6.5 +41
18x7 +41
18x7 +46
19x7.5 +41
19x8 +43.5

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2017-2019 Infiniti QX30: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Base, Premium, Luxury

DiameterWidthOffset range
18-20"7"+24 to +46
18-20"7.5"+30 to +40

Wider still: 18x8.5 +22 to +33; 19x8.5 +22 to +33; 20x8.5 +22 to +33 fit with modifications (roll fender lips, front camber bolts for -1° or more, hub-centric rings if the wheel bore is larger).

Sport

DiameterWidthOffset range
19-20"7.5"+30 to +41

Wider still: 19x8.5 +22 to +33; 20x8.5 +22 to +33 fit with modifications (roll fender lips, front camber bolts for -1° or more, hub-centric rings if the wheel bore is larger).

AWD

DiameterWidthOffset range
17-20"7"+24 to +46
17-20"7.5"+30 to +40

Wider still: 17x8.5 +22 to +33; 18x8.5 +22 to +33; 19x8.5 +22 to +33; 20x8.5 +22 to +33 fit with modifications (roll fender lips, front camber bolts for -1° or more, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2019 Infiniti QX30. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Base, Premium, Luxury

Modifications Required (roll fender lips, front camber bolts for -1° or more, hub-centric rings if the wheel bore is larger)

Sport

Modifications Required (roll fender lips, front camber bolts for -1° or more, hub-centric rings if the wheel bore is larger)

AWD

Modifications Required (roll fender lips, front camber bolts for -1° or more, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2017-2019 Infiniti QX30?

The 2017-2019 Infiniti QX30 uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2017-2019 Infiniti QX30 from the factory?

Factory sizes: 17x6.5 +38; 17x6.5 +41; 18x7 +41; 18x7 +46; 19x7.5 +41; 19x8 +43.5.

What lug thread size does the 2017-2019 Infiniti QX30 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2017-2019 Infiniti QX30 without modifications?

Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.