Infiniti QX4 (R50) 1997-2003 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Infiniti QX4 built from 1997 to 2003 (2WD, 4WD).

Fitment specs

Bolt pattern6X139.7
Center bore100.1 mm
Lug threadM12x1.25
Model years1997-2003
GenerationR50

Every 1997-2003 Infiniti QX4 uses a 6X139.7 bolt pattern with a 100.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 100.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Infiniti QX4 (R50) and the model years each was sold. All of them share the 6X139.7 bolt pattern.

SubmodelYears
2WD1997-2003
4WD1997-2003

Factory wheel sizes

Wheel sizes Infiniti fitted to the 1997-2003 Infiniti QX4 from the factory. Offsets are ET in millimeters.

Factory size
16x7 +20
17x7 +20
17x8 +20
18x7.5 +15
18x8 +20
19x8 +10
19x9 +15
20x9 +15

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1997-2003 Infiniti QX4: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-19"7"-10 to +30
16-19"7.5"-3 to +32
16-19"8"+3 to +25
16-19"8.5"+9 to +19

Wider still: 16x9.5 +1 to +12; 17x9.5 +1 to +12; 18x9.5 +1 to +12; 19x9.5 +1 to +12 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).

FAQ

What is the bolt pattern of the 1997-2003 Infiniti QX4?

The 1997-2003 Infiniti QX4 (R50) uses a 6X139.7 bolt pattern and a 100.1 mm center bore.

What size wheels came on the 1997-2003 Infiniti QX4 from the factory?

Factory sizes: 16x7 +20; 17x7 +20; 17x8 +20; 18x7.5 +15; 18x8 +20; 19x8 +10; 19x9 +15; 20x9 +15.

What lug thread size does the 1997-2003 Infiniti QX4 use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 1997-2003 Infiniti QX4 without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.