Infiniti QX60 (L50) 2014-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Infiniti QX60 built from 2014 to 2020 (Base, Hybrid, Pure, Luxe, Signature Edition).

Fitment specs

Bolt pattern5X114.3
Center bore66.1 mm
Lug threadM12x1.25
Model years2014-2020
GenerationL50

Every 2014-2020 Infiniti QX60 uses a 5X114.3 bolt pattern with a 66.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Infiniti QX60 (L50) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base2014-2018See factory sizes below
Hybrid2014-2017See factory sizes below
Pure2019-202018x7.5 +50
Luxe2019-202018x7.5 +50
Signature Edition2019-2020See factory sizes below

Factory wheel sizes

Wheel sizes Infiniti fitted to the 2014-2020 Infiniti QX60 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7.5 +50
19x7.5 +50
19x8.5 +47
20x7.5 +50
20x8.5 +47
21x9 +43

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2014-2020 Infiniti QX60: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-22"7.5"+33 to +55
18-22"8"+39 to +49

Wider still: 18x9 +31 to +42; 19x9 +31 to +42; 20x9 +31 to +42; 21x9 +31 to +42; 22x9 +31 to +42 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2020 Infiniti QX60. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels)

FAQ

What is the bolt pattern of the 2014-2020 Infiniti QX60?

The 2014-2020 Infiniti QX60 (L50) uses a 5X114.3 bolt pattern and a 66.1 mm center bore.

What size wheels came on the 2014-2020 Infiniti QX60 from the factory?

Factory sizes: 18x7.5 +50; 19x7.5 +50; 19x8.5 +47; 20x7.5 +50; 20x8.5 +47; 21x9 +43.

What lug thread size does the 2014-2020 Infiniti QX60 use?

Its wheel fasteners use a M12x1.25 thread.

What aftermarket wheel sizes fit the 2014-2020 Infiniti QX60 without modifications?

Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.