Jeep Comanche (MJ) 1986-1992 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Jeep Comanche built from 1986 to 1992 (Base, Pioneer, Chief, Laredo, Eliminator).

Fitment specs

Bolt pattern5X114.3
Center bore71.5 mm
Lug thread1/2"-20UNF
Model years1986-1992
GenerationMJ

Every 1986-1992 Jeep Comanche uses a 5X114.3 bolt pattern with a 71.5 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.5 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is 1/2"-20UNF. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Jeep Comanche (MJ) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
Base1986-1992See factory sizes below
Pioneer1986-199015x7 +25
Chief1987-199015x7 +25
Laredo1986-198815x7 +25
Eliminator1987-199215x7 +25

Factory wheel sizes

Wheel sizes Jeep fitted to the 1986-1992 Jeep Comanche from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x7 +25
16x7 +25
17x7.5 +25

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1986-1992 Jeep Comanche: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-19"7"+8 to +31
15-19"7.5"+14 to +24

Wider still: 15x8.5 +6 to +17; 16x8.5 +6 to +17; 17x8.5 +6 to +17; 18x8.5 +6 to +17; 19x8.5 +6 to +17 fit with modifications (2-3 in lift kit for 30-31 in tires, trim front bumper end caps / fender flares, hub-centric rings or lug-centric wheels with correct seat).

FAQ

What is the bolt pattern of the 1986-1992 Jeep Comanche?

The 1986-1992 Jeep Comanche (MJ) uses a 5X114.3 bolt pattern and a 71.5 mm center bore.

What size wheels came on the 1986-1992 Jeep Comanche from the factory?

Factory sizes: 15x7 +25; 16x7 +25; 17x7.5 +25.

What lug thread size does the 1986-1992 Jeep Comanche use?

Its wheel fasteners use a 1/2"-20UNF thread.

What aftermarket wheel sizes fit the 1986-1992 Jeep Comanche without modifications?

Bolt-on sizes run from 15" to 19" in diameter; see the size table for the offset range at each width.