Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Jeep Wagoneer S built from 2025 to 2026.
Every 2025-2026 Jeep Wagoneer S uses a 5X127 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Jeep Wagoneer S (1st Gen) and the model years each was sold. All of them share the 5X127 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Limited | 2025-2026 | 20x8 20x8.5 |
Wheel sizes Jeep fitted to the 2025-2026 Jeep Wagoneer S from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 20x8.5 +40 |
Widths and offsets with Verified Fitment on the 2025-2026 Jeep Wagoneer S: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 20-22" | 8.5" | +23 to +45 |
| 20-22" | 9" | +29 to +39 |
Wider still: 20x10 +21 to +32; 21x10 +21 to +32; 22x10 +21 to +32 fit with modifications (roll fender lips / trim plastic fender liners, 1-2 in leveling or lift kit for larger tires, hub-centric rings for aftermarket wheels).
The 2025-2026 Jeep Wagoneer S (1st Gen) uses a 5X127 bolt pattern and a 71.6 mm center bore.
Factory sizes: 20x8.5 +40.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 20" to 22" in diameter; see the size table for the offset range at each width.