Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Kia Amanti built from 2004 to 2009.
Every 2004-2009 Kia Amanti uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Kia Amanti (GH) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Base | 2004-2009 |
Wheel sizes Kia fitted to the 2004-2009 Kia Amanti from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +46 |
| 17x6.5 +41 |
| 18x7 +40 |
Widths and offsets with Verified Fitment on the 2004-2009 Kia Amanti: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6.5" | +29 to +51 |
| 16-18" | 7" | +35 to +45 |
Wider still: 16x8 +27 to +38; 17x8 +27 to +38; 18x8 +27 to +38 fit with modifications (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2004-2009 Kia Amanti. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger)







The 2004-2009 Kia Amanti (GH) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 16x6.5 +46; 17x6.5 +41; 18x7 +40.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.