Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Kia EV6 built from 2022 to 2026 (Light, Wind, GT-Line, GT).
Every 2022-2026 Kia EV6 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Kia EV6 (CV) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Light | 2022-2026 |
| Wind | 2022-2026 |
| GT-Line | 2022-2026 |
| GT | 2023-2026 |
Wheel sizes Kia fitted to the 2022-2026 Kia EV6 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x7.5 +50 |
| 19x7.5 +54 |
| 19x7.5 +57 |
| 19x8 +50 |
| 19x8.5 +50 |
| 20x8 +48 |
| 20x8 +57 |
| 20x8.5 +50 |
| 21x8.5 +43 |
Widths and offsets with Verified Fitment on the 2022-2026 Kia EV6: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-23" | 7.5" | +37 to +60 |
| 19-23" | 8" | +44 to +54 |
Wider still: 19x9 +36 to +47; 20x9 +36 to +47; 21x9 +36 to +47; 22x9 +36 to +47; 23x9 +36 to +47 fit with modifications (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2026 Kia EV6. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll fender lips, front camber bolts, keep load rating (xl/hl) on heavy ev tires)











The 2022-2026 Kia EV6 (CV) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 18x7.5 +50; 19x7.5 +54; 19x7.5 +57; 19x8 +50; 19x8.5 +50; 20x8 +48; 20x8 +57; 20x8.5 +50; 21x8.5 +43.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 19" to 23" in diameter; see the size table for the offset range at each width.