Kia Forte (TD) 2010-2013 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Kia Forte built from 2010 to 2013 (LX, EX, SX, Koup, Forte5).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2010-2013
GenerationTD

Every 2010-2013 Kia Forte uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Kia Forte (TD) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
LX2010-2013
EX2010-2013
SX2010-2013
Koup2010-2013
Forte52011-2013

Factory wheel sizes

Wheel sizes Kia fitted to the 2010-2013 Kia Forte from the factory. Offsets are ET in millimeters.

Factory size
15x5.5 +41
16x6 +48
17x6.5 +50
17x7 +49
18x7.5 +50

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2010-2013 Kia Forte: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
15-18"5.5"+9 to +51
15-18"6"+15 to +57
15-18"6.5"+21 to +61
15-18"7"+28 to +54
15-18"7.5"+34 to +48
15-18"8"+40 to +42

Wider still: 15x8.5 +30 to +41; 16x8.5 +30 to +41; 17x8.5 +30 to +41; 18x8.5 +30 to +41 fit with modifications (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2010-2013 Kia Forte. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (roll front and rear fender lips, front camber bolts / rear camber adjustment for -1° or more, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2010-2013 Kia Forte?

The 2010-2013 Kia Forte (TD) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2010-2013 Kia Forte from the factory?

Factory sizes: 15x5.5 +41; 16x6 +48; 17x6.5 +50; 17x7 +49; 18x7.5 +50.

What lug thread size does the 2010-2013 Kia Forte use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2010-2013 Kia Forte without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.