Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Kia Sedona built from 2006 to 2014 (LX, EX, SX).
Every 2006-2014 Kia Sedona uses a 6X139.7 bolt pattern with a 92.4 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 92.4 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Kia Sedona (VQ) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| LX | 2006-2014 |
| EX | 2006-2014 |
| SX | 2011-2014 |
Wheel sizes Kia fitted to the 2006-2014 Kia Sedona from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +46 |
| 17x6.5 +46 |
Widths and offsets with Verified Fitment on the 2006-2014 Kia Sedona: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6.5" | +29 to +51 |
| 16-18" | 7" | +35 to +45 |
Wider still: 16x8 +27 to +38; 17x8 +27 to +38; 18x8 +27 to +38 fit with modifications (roll fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
The 2006-2014 Kia Sedona (VQ) uses a 6X139.7 bolt pattern and a 92.4 mm center bore.
Factory sizes: 16x6.5 +46; 17x6.5 +46.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.