Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Kia Sorento built from 2003 to 2009 (LX, EX).
Every 2003-2009 Kia Sorento uses a 5X139.7 bolt pattern with a 95.3 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 95.3 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Kia Sorento (BL) and the model years each was sold. All of them share the 5X139.7 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| LX | 2003-2009 | 16x7 +45 |
| EX | 2003-2009 | 16x7 +45 |
Wheel sizes Kia fitted to the 2003-2009 Kia Sorento from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6 +45 |
| 16x7 +45 |
| 17x7 +45 |
| 18x8 +35 |
Widths and offsets with Verified Fitment on the 2003-2009 Kia Sorento: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 7" | +28 to +50 |
| 16-18" | 7.5" | +34 to +44 |
Wider still: 16x8.5 +26 to +37; 17x8.5 +26 to +37; 18x8.5 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
The 2003-2009 Kia Sorento (BL) uses a 5X139.7 bolt pattern and a 95.3 mm center bore.
Factory sizes: 16x6 +45; 16x7 +45; 17x7 +45; 18x8 +35.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.