Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Kia Soul built from 2010 to 2013 (Base, +, !, Sport).
Every 2010-2013 Kia Soul uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Kia Soul (AM) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2010-2013 | See factory sizes below |
| + | 2010-2013 | 18x7 +54 18x7.5 +62 |
| ! | 2010-2013 | 18x7 +54 18x7.5 +62 |
| Sport | 2010-2013 | 18x7 +54 |
Wheel sizes Kia fitted to the 2010-2013 Kia Soul from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x6 +44 |
| 16x6.5 +50 |
| 18x7 +54 |
| 18x7.5 +62 |
Widths and offsets with Verified Fitment on the 2010-2013 Kia Soul: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 6" | +9 to +54 |
| 15-18" | 6.5" | +15 to +57 |
| 15-18" | 7" | +21 to +51 |
| 15-18" | 7.5" | +28 to +44 |
| 15-18" | 8" | +34 to +38 |
| Diameter | Width | Offset range |
|---|---|---|
| 18" | 7" | +21 to +54 |
| 18" | 7.5" | +28 to +47 |
| 18" | 8" | +34 to +41 |
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2010-2013 Kia Soul. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.













The 2010-2013 Kia Soul (AM) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 15x6 +44; 16x6.5 +50; 18x7 +54; 18x7.5 +62.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.