Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus CT built from 2011 to 2017.
Every 2011-2017 Lexus CT uses a 5X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus CT (A10) and the model years each was sold. All of them share the 5X100 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| CT 200h | 2011-2017 | 16x6 +45 17x7 +45 17x7.5 +42 18x7.5 +42 18x8 +38 |
Wheel sizes Lexus fitted to the 2011-2017 Lexus CT from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6 +45 |
| 17x7 +45 |
| 17x7.5 +42 |
| 18x7.5 +42 |
| 18x8 +38 |
Widths and offsets with Verified Fitment on the 2011-2017 Lexus CT: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-18" | 6" | +9 to +55 |
| 16-18" | 6.5" | +15 to +57 |
| 16-18" | 7" | +21 to +51 |
| 16-18" | 7.5" | +28 to +44 |
| 16-18" | 8" | +34 to +38 |
The 2011-2017 Lexus CT (A10) uses a 5X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 16x6 +45; 17x7 +45; 17x7.5 +42; 18x7.5 +42; 18x8 +38.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.