Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus ES built from 1990 to 1991.
Every 1990-1991 Lexus ES uses a 5X100 bolt pattern with a 54.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 54.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus ES (V20) and the model years each was sold. All of them share the 5X100 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| ES 250 | 1990-1991 | 15x5.5 +45 16x6 +45 16x6.5 +48 17x6.5 +48 17x7 +42 |
Wheel sizes Lexus fitted to the 1990-1991 Lexus ES from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 15x5.5 +45 |
| 16x6 +45 |
| 16x6.5 +48 |
| 17x6.5 +48 |
| 17x7 +42 |
Widths and offsets with Verified Fitment on the 1990-1991 Lexus ES: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 15-18" | 5.5" | +28 to +50 |
| 15-18" | 6" | +34 to +44 |
Wider still: 15x7 +26 to +37; 16x7 +26 to +37; 17x7 +26 to +37; 18x7 +26 to +37 fit with modifications (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger).
The 1990-1991 Lexus ES (V20) uses a 5X100 bolt pattern and a 54.1 mm center bore.
Factory sizes: 15x5.5 +45; 16x6 +45; 16x6.5 +48; 17x6.5 +48; 17x7 +42.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.