Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Lexus GX built from 2010 to 2022.
Every 2010-2022 Lexus GX uses a 6X139.7 bolt pattern with a 106.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 106.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus GX (J150) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years |
|---|---|
| GX 460 | 2010-2022 |
Wheel sizes Lexus fitted to the 2010-2022 Lexus GX from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x7.5 +25 |
| 18x8 +25 |
| 18x8.5 +20 |
| 19x8 +25 |
| 19x8.5 +20 |
| 20x8.5 +25 |
| 20x9 +10 |
| 20x10 +10 |
Widths and offsets with Verified Fitment on the 2010-2022 Lexus GX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7.5" | -7 to +30 |
| 17-20" | 8" | -1 to +24 |
| 17-20" | 8.5" | +6 to +17 |
Wider still: 17x9 -29 to +11; 17x9.5 -23 to +5; 17x10 -17 to -2; 18x9 -29 to +11; 18x9.5 -23 to +5; 18x10 -17 to -2… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
The 2010-2022 Lexus GX (J150) uses a 6X139.7 bolt pattern and a 106.1 mm center bore.
Factory sizes: 18x7.5 +25; 18x8 +25; 18x8.5 +20; 19x8 +25; 19x8.5 +20; 20x8.5 +25; 20x9 +10; 20x10 +10.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.