Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus HS built from 2010 to 2012.
Every 2010-2012 Lexus HS uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus HS (ANF10) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| HS 250h | 2010-2012 | 17x7 +39 17x7.5 +39 18x7.5 +39 18x8 +35 |
Wheel sizes Lexus fitted to the 2010-2012 Lexus HS from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +39 |
| 17x7.5 +39 |
| 18x7.5 +39 |
| 18x8 +35 |
Widths and offsets with Verified Fitment on the 2010-2012 Lexus HS: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-19" | 7" | +22 to +45 |
| 17-19" | 7.5" | +28 to +38 |
Wider still: 17x8.5 +20 to +31; 18x8.5 +20 to +31; 19x8.5 +20 to +31 fit with modifications (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2010-2012 Lexus HS. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (roll front and rear fender lips, front camber bolts (strut) for -1° or more, hub-centric rings if the wheel bore is larger)








The 2010-2012 Lexus HS (ANF10) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.
Factory sizes: 17x7 +39; 17x7.5 +39; 18x7.5 +39; 18x8 +35.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 19" in diameter; see the size table for the offset range at each width.