Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus LFA built from 2012 to 2012.
Every 2012 Lexus LFA uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus LFA (LFA10) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| LFA | 2012 | 20x9.5 +45 front / 20x11.5 +45 rear 21x10 +40 front / 21x12 +40 rear |
Wheel sizes Lexus fitted to the 2012 Lexus LFA from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 20x9.5 +45 front / 20x11.5 +45 rear |
| 21x10 +40 front / 21x12 +40 rear |
Widths and offsets with Verified Fitment on the 2012 Lexus LFA: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20-21" | 9.5" | +28 to +50 | — |
| 20-21" | 10" | +34 to +44 | — |
| 20-21" | 11.5" | — | +28 to +50 |
| 20-21" | 12" | — | +34 to +44 |
Wider still: 20x13 front — / rear +26 to +37; 21x13 front — / rear +26 to +37 fit with modifications (roll or pull rear fender lips, rear camber arms for -1.5° or more, front camber bolts / arms, trim inner liner if needed).
The 2012 Lexus LFA (LFA10) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.
Factory sizes: 20x9.5 +45 front / 20x11.5 +45 rear; 21x10 +40 front / 21x12 +40 rear.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 20" to 21" in diameter; see the size table for the offset range at each width.