Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus LX built from 1996 to 1997.
Every 1996-1997 Lexus LX uses a 6X139.7 bolt pattern with a 106.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 106.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus LX (J80) and the model years each was sold. All of them share the 6X139.7 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| LX 450 | 1996-1997 | 16x8 +0 17x8 +0 18x8 +0 19x8.5 +0 |
Wheel sizes Lexus fitted to the 1996-1997 Lexus LX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x8 +0 |
| 17x8 +0 |
| 18x8 +0 |
| 19x8.5 +0 |
Widths and offsets with Verified Fitment on the 1996-1997 Lexus LX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-19" | 8" | -17 to +6 |
| 16-19" | 8.5" | -11 to -1 |
Wider still: 16x9.5 -19 to -8; 17x9.5 -19 to -8; 18x9.5 -19 to -8; 19x9.5 -19 to -8 fit with modifications (2-in leveling kit for 32-33 in tires, trim front bumper / air dam and inner fender liners, aftermarket upper control arms if leveled more than 2 in).
The 1996-1997 Lexus LX (J80) uses a 6X139.7 bolt pattern and a 106.1 mm center bore.
Factory sizes: 16x8 +0; 17x8 +0; 18x8 +0; 19x8.5 +0.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.