Lexus NX (AZ20) 2022-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus NX built from 2022 to 2026 (NX 250, NX 350, NX 350h, NX 450h+).

Fitment specs

Bolt pattern5X114.3
Center bore60.1 mm
Lug threadM14x1.5
Model years2022-2026
GenerationAZ20

Every 2022-2026 Lexus NX uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Lexus NX (AZ20) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
NX 2502022-202618x7.5 +35
19x7.5 +35
20x7.5 +35
NX 3502022-202618x7.5 +35
20x7.5 +35
20x8 +35
NX 350h2022-202618x7.5 +35
19x7.5 +35
20x7.5 +35
NX 450h+2022-202618x7.5 +35
20x7.5 +35
20x8 +35

Factory wheel sizes

Wheel sizes Lexus fitted to the 2022-2026 Lexus NX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x7.5 +35
19x7.5 +35
20x7.5 +35
20x8 +35

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2022-2026 Lexus NX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

NX 250, NX 350h, NX 450h+

DiameterWidthOffset range
18-20"7.5"+20 to +45
18-20"8"+26 to +41
18-20"8.5"+33 to +34

Wider still: 18x9 +24 to +36; 19x9 +24 to +36; 20x9 +24 to +36; 21x9 +24 to +36 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

NX 350

DiameterWidthOffset range
18-20"7.5"+20 to +45
18-20"8"+26 to +41
18-20"8.5"+33 to +34

Wider still: 18x9 +24 to +36; 19x9 +24 to +36; 20x9 +24 to +36; 21x9 +24 to +36 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2022-2026 Lexus NX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

NX 250, NX 350h, NX 450h+

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

NX 350

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2022-2026 Lexus NX?

The 2022-2026 Lexus NX (AZ20) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.

What size wheels came on the 2022-2026 Lexus NX from the factory?

Factory sizes: 18x7.5 +35; 19x7.5 +35; 20x7.5 +35; 20x8 +35.

What lug thread size does the 2022-2026 Lexus NX use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2022-2026 Lexus NX without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.