Lexus RC (XC10) 2015-2025 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus RC built from 2015 to 2025 (RC 200t, RC 300, RC 350, RC F).

Fitment specs

Bolt pattern5X114.3
Center bore60.1 mm
Lug threadM12x1.5
Model years2015-2025
GenerationXC10

Every 2015-2025 Lexus RC uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Lexus RC (XC10) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYearsFactory wheel sizes
RC 200t2016-201718x8 +45
19x8 +45
19x8 +45 front / 19x9 +60 rear
20x8 +45 front / 20x9.5 +55 rear
RC 3002016-202518x8 +45
19x8 +45
19x8 +45 front / 19x9 +60 rear
20x8 +45 front / 20x9.5 +55 rear
20x8.5 +45 front / 20x9.5 +55 rear
20x9.5 +55
RC 3502015-202518x8 +45
19x8 +45
19x8 +45 front / 19x9 +60 rear
19x9 +60
20x8.5 +45 front / 20x9.5 +55 rear
20x9.5 +55
RC F2015-202519x9 +50 front / 19x10 +41 rear
20x9 +50 front / 20x10 +40 rear

Factory wheel sizes

Wheel sizes Lexus fitted to the 2015-2025 Lexus RC from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +45
18x8.5 +45
19x8 +45
19x8 +45 front / 19x9 +60 rear
19x8.5 +45
19x8.5 +45 front / 19x9.5 +60 rear
19x9 +60
20x8 +45 front / 20x9.5 +55 rear
20x8.5 +45 front / 20x9.5 +55 rear
20x9.5 +55

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2015-2025 Lexus RC: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

RC 200t, RC 300, RC 350

DiameterWidthFront offsetRear offset
18-21"8"+21 to +55+19 to +55
18-21"8.5"+28 to +50+25 to +61
18-21"9"+34 to +44+31 to +67
18-21"9.5"—+38 to +60
18-21"10"—+44 to +54

Wider still: 18x11 front — / rear +36 to +47; 19x11 front — / rear +36 to +47; 20x11 front — / rear +36 to +47; 21x11 front — / rear +36 to +47 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

RC F

DiameterWidthFront offsetRear offset
19-21"9"+34 to +50—
19-21"9.5"+41 to +43—
19-21"10"—+41 to +51
19-21"10.5"—+48

Wider still: 19x11 front — / rear +36 to +47; 20x11 front — / rear +36 to +47; 21x11 front — / rear +36 to +47 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2015-2025 Lexus RC. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

RC 200t, RC 300, RC 350

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

RC F

Modifications Required (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install)

FAQ

What is the bolt pattern of the 2015-2025 Lexus RC?

The 2015-2025 Lexus RC (XC10) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.

What size wheels came on the 2015-2025 Lexus RC from the factory?

Factory sizes: 18x8 +45; 18x8.5 +45; 19x8 +45; 19x8 +45 front / 19x9 +60 rear; 19x8.5 +45; 19x8.5 +45 front / 19x9.5 +60 rear; 19x9 +60; 20x8 +45 front / 20x9.5 +55 rear; 20x8.5 +45 front / 20x9.5 +55 rear; 20x9.5 +55.

What lug thread size does the 2015-2025 Lexus RC use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2015-2025 Lexus RC without modifications?

Bolt-on sizes run from 18" to 21" in diameter; see the size table for the offset range at each width.