Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus RX built from 1999 to 2003.
Every 1999-2003 Lexus RX uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus RX (XU10) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| RX 300 | 1999-2003 | 16x6.5 +35 17x6.5 +35 18x7 +35 18x7 +38 18x7.5 +38 19x7.5 +38 19x8 +35 20x8 +35 |
Wheel sizes Lexus fitted to the 1999-2003 Lexus RX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +35 |
| 17x6.5 +35 |
| 18x7 +35 |
| 18x7 +38 |
| 18x7.5 +38 |
| 19x7.5 +38 |
| 19x8 +35 |
| 20x8 +35 |
Widths and offsets with Verified Fitment on the 1999-2003 Lexus RX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 6.5" | +18 to +40 |
| 16-20" | 7" | +24 to +34 |
Wider still: 16x8 +16 to +27; 17x8 +16 to +27; 18x8 +16 to +27; 19x8 +16 to +27; 20x8 +16 to +27 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).
The 1999-2003 Lexus RX (XU10) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.
Factory sizes: 16x6.5 +35; 17x6.5 +35; 18x7 +35; 18x7 +38; 18x7.5 +38; 19x7.5 +38; 19x8 +35; 20x8 +35.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.