Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus RZ built from 2023 to 2026 (RZ 300e, RZ 450e, 350e, 350e Premium, 450e, 450e Luxury, 450e Premium, 550e F Sport).
Every 2023-2026 Lexus RZ uses a 5X114.3 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Lexus RZ (1st Gen) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| RZ 300e | 2024-2025 | 18x7.5 +35 front / 18x8 +35 rear 20x8 +35 front / 20x9.5 +35 rear |
| RZ 450e | 2023-2025 | 18x7.5 +35 front / 18x8 +35 rear 20x8 +35 front / 20x9.5 +35 rear |
| 350e | 2026 | See factory sizes below |
| 350e Premium | 2026 | See factory sizes below |
| 450e | 2026 | See factory sizes below |
| 450e Luxury | 2026 | See factory sizes below |
| 450e Premium | 2026 | See factory sizes below |
| 550e F Sport | 2026 | See factory sizes below |
Wheel sizes Lexus fitted to the 2023-2026 Lexus RZ from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x7.5 +35 front / 18x8 +35 rear |
| 20x8 +35 front / 20x9.5 +35 rear |
Widths and offsets with Verified Fitment on the 2023-2026 Lexus RZ: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-22" | 7.5" | +12 to +45 | — |
| 18-22" | 8" | +18 to +40 | -1 to +45 |
| 18-22" | 8.5" | +24 to +34 | +5 to +51 |
| 18-22" | 9" | — | +11 to +47 |
| 18-22" | 9.5" | — | +18 to +40 |
| 18-22" | 10" | — | +24 to +34 |
Wider still: 18x11 front — / rear +16 to +27; 19x11 front — / rear +16 to +27; 20x11 front — / rear +16 to +27; 21x11 front — / rear +16 to +27; 22x11 front — / rear +16 to +27 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 Lexus RZ. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.











Modifications Required (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels)












The 2023-2026 Lexus RZ (1st Gen) uses a 5X114.3 bolt pattern and a 60.1 mm center bore.
Factory sizes: 18x7.5 +35 front / 18x8 +35 rear; 20x8 +35 front / 20x9.5 +35 rear.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.