Lexus TX 1st Gen 2024-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Lexus TX built from 2024 to 2026 (TX 350, TX 500h, TX 550h+).

Fitment specs

Bolt pattern5X120
Center bore60.1 mm
Lug threadM14x1.5
Model years2024-2026
Generation1st Gen

Every 2024-2026 Lexus TX uses a 5X120 bolt pattern with a 60.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 60.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Lexus TX (1st Gen) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
TX 3502024-202620x8 +40
22x9 +35
TX 500h2024-202620x8 +40
22x9 +35
TX 550h+2024-202620x8 +40
22x9 +35

Factory wheel sizes

Wheel sizes Lexus fitted to the 2024-2026 Lexus TX from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
20x8 +40
22x9 +35

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2024-2026 Lexus TX: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

TX 350

DiameterWidthOffset range
20-22"8"+23 to +45
20-22"8.5"+29 to +39

Wider still: 20x9.5 +21 to +32; 21x9.5 +21 to +32; 22x9.5 +21 to +32 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).

TX 500h, TX 550h+

DiameterWidthOffset range
20-22"9"+35

Wider still: 20x9.5 +21 to +32; 21x9.5 +21 to +32; 22x9.5 +21 to +32 fit with modifications (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2024-2026 Lexus TX. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

TX 350

Modifications Required (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels)

TX 500h, TX 550h+

Modifications Required (roll fender lips, trim plastic fender liners / bumper edges, camber bolts for wider, lower-offset wheels)

FAQ

What is the bolt pattern of the 2024-2026 Lexus TX?

The 2024-2026 Lexus TX (1st Gen) uses a 5X120 bolt pattern and a 60.1 mm center bore.

What size wheels came on the 2024-2026 Lexus TX from the factory?

Factory sizes: 20x8 +40; 22x9 +35.

What lug thread size does the 2024-2026 Lexus TX use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2024-2026 Lexus TX without modifications?

Bolt-on sizes run from 20" to 22" in diameter; see the size table for the offset range at each width.