Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda CX-3 built from 2016 to 2021 (Sport, Touring, Grand Touring).
Every 2016-2021 Mazda CX-3 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda CX-3 (DK) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Sport | 2016-2021 | 16x6 +45 16x6.5 +50 |
| Touring | 2016-2020 | 16x6 +45 16x6.5 +50 18x7 +50 |
| Grand Touring | 2016-2020 | 18x7 +50 |
Wheel sizes Mazda fitted to the 2016-2021 Mazda CX-3 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6 +45 |
| 16x6.5 +50 |
| 17x6.5 +50 |
| 17x7 +50 |
| 18x7 +50 |
| 18x7.5 +48 |
| 19x7 +48 |
| 19x7.5 +48 |
| 19x8 +48 |
Widths and offsets with Verified Fitment on the 2016-2021 Mazda CX-3: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-19" | 6" | +26 to +55 |
| 16-19" | 6.5" | +33 to +55 |
| 16-19" | 7" | +39 to +49 |
Wider still: 16x8 +31 to +42; 17x8 +31 to +42; 18x8 +31 to +42; 19x8 +31 to +42 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
| Diameter | Width | Offset range |
|---|---|---|
| 18-19" | 7" | +39 to +50 |
Wider still: 18x8 +31 to +42; 19x8 +31 to +42 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2021 Mazda CX-3. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)







Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)






The 2016-2021 Mazda CX-3 (DK) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 16x6 +45; 16x6.5 +50; 17x6.5 +50; 17x7 +50; 18x7 +50; 18x7.5 +48; 19x7 +48; 19x7.5 +48; 19x8 +48.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.