Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda CX-30 built from 2020 to 2026 (Base, Select, Preferred, Carbon Edition, Premium, Turbo, Turbo Premium, Turbo Premium Plus).
Every 2020-2026 Mazda CX-30 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda CX-30 (DM) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Base | 2020-2022 | 16x6.5 +45 |
| Select | 2020-2026 | 18x7 +45 |
| Preferred | 2020-2026 | 18x7 +45 |
| Carbon Edition | 2022-2026 | See factory sizes below |
| Premium | 2020-2026 | 18x7 +45 |
| Turbo | 2021-2026 | See factory sizes below |
| Turbo Premium | 2021-2026 | See factory sizes below |
| Turbo Premium Plus | 2021-2026 | See factory sizes below |
Wheel sizes Mazda fitted to the 2020-2026 Mazda CX-30 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x6.5 +45 |
| 17x6.5 +45 |
| 17x7 +45 |
| 17x7.5 +45 |
| 18x7 +45 |
| 18x7.5 +45 |
| 19x7.5 +45 |
| 19x8 +45 |
Widths and offsets with Verified Fitment on the 2020-2026 Mazda CX-30: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 6.5" | +22 to +55 |
| 16-20" | 7" | +28 to +50 |
| 16-20" | 7.5" | +34 to +44 |
Wider still: 16x8.5 +26 to +37; 17x8.5 +26 to +37; 18x8.5 +26 to +37; 19x8.5 +26 to +37; 20x8.5 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 7" | +28 to +50 |
| 18-20" | 7.5" | +34 to +44 |
Wider still: 18x8.5 +26 to +37; 19x8.5 +26 to +37; 20x8.5 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
| Diameter | Width | Offset range |
|---|---|---|
| 16-20" | 7" | +28 to +50 |
| 16-20" | 7.5" | +34 to +44 |
Wider still: 16x8.5 +26 to +37; 17x8.5 +26 to +37; 18x8.5 +26 to +37; 19x8.5 +26 to +37; 20x8.5 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2020-2026 Mazda CX-30. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)












Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)












Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)












The 2020-2026 Mazda CX-30 (DM) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 16x6.5 +45; 17x6.5 +45; 17x7 +45; 17x7.5 +45; 18x7 +45; 18x7.5 +45; 19x7.5 +45; 19x8 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 16" to 20" in diameter; see the size table for the offset range at each width.