Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mazda CX-50 built from 2023 to 2026 (Select, Preferred, Premium, Premium Plus, Meridian Edition, Turbo, Turbo Premium, Turbo Premium Plus, Hybrid).
Every 2023-2026 Mazda CX-50 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda CX-50 (1st Gen (VA)) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Select | 2023-2026 |
| Preferred | 2023-2026 |
| Premium | 2023-2026 |
| Premium Plus | 2023-2026 |
| Meridian Edition | 2023-2026 |
| Turbo | 2023-2026 |
| Turbo Premium | 2023-2026 |
| Turbo Premium Plus | 2023-2026 |
| Hybrid | 2025-2026 |
Wheel sizes Mazda fitted to the 2023-2026 Mazda CX-50 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +40 |
| 18x7 +40 |
| 19x7 +40 |
| 19x7.5 +40 |
| 19x8 +45 |
| 20x8 +45 |
Widths and offsets with Verified Fitment on the 2023-2026 Mazda CX-50: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-22" | 7" | +15 to +50 |
| 17-22" | 7.5" | +22 to +56 |
| 17-22" | 8" | +28 to +50 |
| 17-22" | 8.5" | +34 to +44 |
Wider still: 17x9.5 +26 to +37; 18x9.5 +26 to +37; 19x9.5 +26 to +37; 20x9.5 +26 to +37; 21x9.5 +26 to +37; 22x9.5 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 Mazda CX-50. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)





The 2023-2026 Mazda CX-50 (1st Gen (VA)) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 17x7 +40; 18x7 +40; 19x7 +40; 19x7.5 +40; 19x8 +45; 20x8 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.