Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mazda CX-7 built from 2007 to 2012 (Sport, Touring, Grand Touring, i SV, i Sport, s Touring, s Grand Touring).
Every 2007-2012 Mazda CX-7 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda CX-7 (ER) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Sport | 2007-2009 | 18x7.5 +50 |
| Touring | 2007-2009 | 18x7.5 +50 |
| Grand Touring | 2007-2009 | 18x7.5 +50 |
| i SV | 2010-2011 | 17x7 +45 |
| i Sport | 2010-2012 | 17x7 +45 |
| s Touring | 2010-2012 | 18x7.5 +50 |
| s Grand Touring | 2010-2012 | 19x7.5 +50 |
Wheel sizes Mazda fitted to the 2007-2012 Mazda CX-7 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +45 |
| 17x7 +50 |
| 18x7.5 +50 |
| 18x8 +48 |
| 19x7.5 +50 |
| 19x7.5 +55 |
| 19x8 +48 |
| 19x8.5 +45 |
Widths and offsets with Verified Fitment on the 2007-2012 Mazda CX-7: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 7.5" | +33 to +55 |
| 18-20" | 8" | +39 to +49 |
Wider still: 18x9 +31 to +42; 19x9 +31 to +42; 20x9 +31 to +42 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7" | +26 to +55 |
| 17-20" | 7.5" | +33 to +55 |
| 17-20" | 8" | +39 to +49 |
Wider still: 17x9 +31 to +42; 18x9 +31 to +42; 19x9 +31 to +42; 20x9 +31 to +42 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
| Diameter | Width | Offset range |
|---|---|---|
| 19-20" | 7.5" | +33 to +55 |
| 19-20" | 8" | +39 to +49 |
Wider still: 19x9 +31 to +42; 20x9 +31 to +42 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2007-2012 Mazda CX-7. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.
Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)












Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)












Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)











The 2007-2012 Mazda CX-7 (ER) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 17x7 +45; 17x7 +50; 18x7.5 +50; 18x8 +48; 19x7.5 +50; 19x7.5 +55; 19x8 +48; 19x8.5 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.