Mazda CX-70 (KJ) 2025-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mazda CX-70 built from 2025 to 2026 (Turbo, Turbo Premium, Turbo S Premium, Turbo S Premium Plus, PHEV Premium, PHEV Premium Plus).

Fitment specs

Bolt pattern5X114.3
Center bore67.1 mm
Lug threadM12x1.5
Model years2025-2026
GenerationKJ

Every 2025-2026 Mazda CX-70 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mazda CX-70 (KJ) and the model years each was sold. All of them share the 5X114.3 bolt pattern.

SubmodelYears
Turbo2025-2026
Turbo Premium2025-2026
Turbo S Premium2025-2026
Turbo S Premium Plus2025-2026
PHEV Premium2025-2026
PHEV Premium Plus2025-2026

Factory wheel sizes

Wheel sizes Mazda fitted to the 2025-2026 Mazda CX-70 from the factory. Offsets are ET in millimeters.

Factory size
18x8 +45
19x8.5 +45
20x9 +45
21x9.5 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2025-2026 Mazda CX-70: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
18-23"8"+9 to +55
18-23"8.5"+15 to +61
18-23"9"+21 to +57
18-23"9.5"+28 to +50
18-23"10"+34 to +44

Wider still: 18x11 +26 to +37; 19x11 +26 to +37; 20x11 +26 to +37; 21x11 +26 to +37; 22x11 +26 to +37; 23x11 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2025-2026 Mazda CX-70. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)

FAQ

What is the bolt pattern of the 2025-2026 Mazda CX-70?

The 2025-2026 Mazda CX-70 (KJ) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.

What size wheels came on the 2025-2026 Mazda CX-70 from the factory?

Factory sizes: 18x8 +45; 19x8.5 +45; 20x9 +45; 21x9.5 +45.

What lug thread size does the 2025-2026 Mazda CX-70 use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 2025-2026 Mazda CX-70 without modifications?

Bolt-on sizes run from 18" to 23" in diameter; see the size table for the offset range at each width.