Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Mazda CX-9 built from 2007 to 2015 (Sport, Touring, Grand Touring).
Every 2007-2015 Mazda CX-9 uses a 5X114.3 bolt pattern with a 67.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 67.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mazda CX-9 (TB) and the model years each was sold. All of them share the 5X114.3 bolt pattern.
| Submodel | Years |
|---|---|
| Sport | 2007-2015 |
| Touring | 2007-2015 |
| Grand Touring | 2007-2015 |
Wheel sizes Mazda fitted to the 2007-2015 Mazda CX-9 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 18x7.5 +45 |
| 19x7.5 +45 |
| 19x7.5 +55 |
| 20x7.5 +45 |
Widths and offsets with Verified Fitment on the 2007-2015 Mazda CX-9: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-22" | 7.5" | +28 to +50 |
| 18-22" | 8" | +34 to +44 |
Wider still: 18x9 +26 to +37; 19x9 +26 to +37; 20x9 +26 to +37; 21x9 +26 to +37; 22x9 +26 to +37 fit with modifications (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2007-2015 Mazda CX-9. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.






Modifications Required (trim front bumper cover / inner fender liner at full lock, roll or pull fender lips, front camber bolts, hub-centric rings if the wheel bore is larger)












The 2007-2015 Mazda CX-9 (TB) uses a 5X114.3 bolt pattern and a 67.1 mm center bore.
Factory sizes: 18x7.5 +45; 19x7.5 +45; 19x7.5 +55; 20x7.5 +45.
Its wheel fasteners use a M12x1.5 thread.
Bolt-on sizes run from 18" to 22" in diameter; see the size table for the offset range at each width.